High Low converter (2-channel). Mosconi HLA Slim HP (10:1).

Mosconi HLA Slim HP (10:1) Hi to Low High End adapter. 

The main improvements are: 
No plastic case and plug, therefore very small and easy to install 
The double possible input power handling 
Remote output capability increased from 15 mA to 100 mA 
Of course still made in Italy like all MOSCONI products now and in the future! 
Tecnical data: 
Stand-By Current Consumption < 0.8mA 
Operative Current Consumption < 15mA (< 30mA in the Dual version) 
Polarity Inversion Protection Yes 
Max allowed current on Remote Out 100 mA (normal operation) 
Min allowed load on Remote Out 120 Ohm (normal operation) 
Remote Out Voltage > 12V @ Irem-out < 100mA 
Remote Out Short Circuit Protection Yes (to ground) 
Max Short Circuit duration on Remote Out < 10 second (*) 
Total Harmonic Distortion < 0.01% 
Slew Rate 10V/uS 
S/N Ratio > 100dB 
Channel Separation > 60dB 
Common Mode Noise Rejection > 60dB 
Stepdown conversion ratio 10:1 V/V 
High Level Input ballast impedance 45 Ohm / 2W each channel 
Max continuous (sinewave) Power handling @ 4Ohm 25Wrms x CH 
Max allowed Head-Unit nominal power handling 100W x CH (**) 
Max Output Signal @ THD < 0.1% 3.2 Vrms 
Min Output Load Impedence 2 KOhm.